Skip to main content
The privacy protection officer.

Take off the contaminated clothing, put on a clean set of clothes. The new Vetter PPE Changing Tent is equipped with a compressed air connection and is ready for operation within 1 minute. It adapts conveniently to pavements or behind the emergency vehicle and with two cabins, offers sufficient space at the place of deployment for squads to change their cloths. With fire-fighting operations, fire fighters are not only exposed to hazards from the deployment, but also, e.g., from harmful substances caused by the fire: The emergency personnel are frequently exposed to a lot of poisonous and carcinogenic substances – an everyday risk that is a health hazard for men and women. To minimise the risk to health, in DGUV Information 205-035, the German Statutory Accident Insurance (DGUV) specifies that contaminated PPE must be taken off at the place of use and replaced with a clean set of clothes.

Quickly erected and space saving design
The tent comprises only one packed product and using compressed air or blower fan, is ready for use within a few minutes. To make erection even easier, the side walls, partition wall and floor tarpaulin are already fixed to the tent itself, allowing them to be automatically erected. Using the hook-and-loop system, the partition wall is optionally secured in just one action. With the concept, Vetter has also considered the space problem on location: Thanks to the compact size, the tent fits conveniently on pavements or behind the emergency vehicle.

1 tent, 2 changing cabins & even more benefit:
  • Stowed away saving space: The tent is supplied as a compact packed product
  • Quickly erected and self-erecting: Setup with compressed air in 40 seconds
  • Ready to use immediately: side walls, partition wall and floor tarpaulin are already fixed to the tent
  • Sufficient area, to change clothes in two cabins in squads
  • Protects emergency services and provides a wind and weather protected location to change the contaminated PPE
  • Individualised: Banners with lettering can be optionally attached to the side walls
  • Quickly cleaned: The tent floor can be removed to make cleaning easier
  • Flexible: with an entrance on both sides
Product number: 1520059700
Videos "PPE Changing tent"
Product number: 1520059700
Weight: 35 kg
Air requirement [l]: 1005
Cabin area [inch]: 190 x 180
Floor area [m²]: 6,84
Outer size [inch]: 149,6 x 70,87 x 100,39
Quantitiy of cabins: 2
burst pressure [psi]: 7,25
set up time [sec]: 40
Accessories "PPE Changing tent"

Zubehör

Vacuum Adaptor
Product number: 1600016301
Dual connector
Product number: 1600009100
Window
Product number: 1520020600
Ventilation flap
Product number: 1520025800
Duct openings
Product number: 1520020500
Tent print marking
Product number: 1520022400
Cover with print
Product number: 1520025600
Roof window
Product number: 1520041300
Scheren-Rollenbahn
Product number: 1520039700
Spineboard
Product number: 1520039400

Zubehör

Vacuum Adaptor
Product number: 1600016301
Dual connector
Product number: 1600009100
Window
Product number: 1520020600
Ventilation flap
Product number: 1520025800
Duct openings
Product number: 1520020500
Tent print marking
Product number: 1520022400
Cover with print
Product number: 1520025600
Roof window
Product number: 1520041300
Scheren-Rollenbahn
Product number: 1520039700
Spineboard
Product number: 1520039400